For those that are unfamiliar, Shellback Tactical’s latest and greatest plate carrier is the Banshee Rifle Plate Carrier. This low-profile plate carrier is constructed entirely in America, with quality design and construction that can easily make this plate carrier worth over $200.00. However, considering the plethora of features this plate carrier has to offer, it is astounding that this plate carrier is only priced at $160.00 USD.
This plate carrier is designed for actual police and military use, meaning that it has the capability of carrying real rifle plates and enduring the wear that such plates can cause. Additionally, the ruggedness of this carrier is paired with a low profile cut to produce a carrier that is both slim and durable.
For those who wish to minimize weight, the Banshee has the option of functioning with or without a cummerbund. Furthermore, the trim design of the Banshee does not sacrifice speed for comfort. As seen in the picture below, the Banshee features fairly wide and padded shoulder straps to maximize comfort. If that is not enough however, Shellback Tactical offers after-market shoulder pads that can be attached to the plate carrier for even more operator comfort.
All in all, the Banshee Rifle Plate Carrier offers plenty of bang for your buck. For only $159.99 USD, the Shellback Tactical Banshee Rifle Plate Carrier provides a comfortable, low-profile, and affordable mounting option for all your tactical accessories.
Check it out at www.airsoftgi.com today, and remember to save 20% off your order with coupon code ’20offdaily’
For those that missed the livestream yesterday, Tim, Bob & Josh talk about some new stuff coming out in the airsoft world. Take alook especially if you’ve ever been interested in an affordable Navy SEAL loadout!
Over the years, I have been to numerous airsoft games and I found the common mistake that airsofters make (including yours truly) is not setting up your gear properly. A lot of airsofters imitate military operators (Navy SEALs, U.S. Marine Force Recon, etc) and do not realize there are reasons why military operators set up their gear a certain way. Setting up your gear correctly can increase your efficiency and minimize the chance of you getting shot.
After years and years of T&E (Testing & Evaluating, courtesy of my boss :D), I found out that keeping it simple is the best way to go. Obviously, I am not telling you to go out there and copy me or anyone else. I am telling you to test out your gear before you spend your hard earn money on unnecessary gear. There are a few things that are extremely important for me when I am looking for any tactical gear. First thing I look for is the material. Since I use the same gear in airsoft and real steel, 1000 Denier Cordura is a must on all my tactical gear, especially my plate carrier. 1000 Denier Cordura is more durable, more reliable, and more tear resistance than any other nylon out there. Every products Specter Gear, J-Tech, and Pantac manufactures is 1000 Denier Cordura. Second thing I look for in my tactical gear is stitching. Believe it or not, I have ripped a MOLLE loop from mounting a pouch. It is heart breaking when you thought you had bought a decent piece of gear. Stitching on Specter Gear and J-Tech (Taiwanese Military) is good, since it is designed for the military and law enforcement community. Pantac made its reputation a long time ago as the top of the line Airsoft gear. Third thing I look for in my tactical gear is modularity. I need to the ability to customize as much as possible. Therefore I do not like any type of cross draw vests. With MOLLE plate carriers and most chest rigs, I have the ability to customize where I want my gear, such as pouches, hydration, etc. The final thing I look for is comfort, especially on my plate carrier. Since all the weight is on my plate carrier (ballistic plates, fully loaded magazines, even airsoft magazines eventually get heavy), it is smart and logical to have a little bit of comfort when carrying all that weight. Setting up for success Currently, I run a low profile plate carrier and a battle belt to hold all of my life support equipment ( mags, med kit, etc). First, on my battle belt, starting from left to right, I have 3 pistol magazine pouches, followed by 3 rifle magazine pouches. After that, a utility pouch sits right in the middle of the back side, followed by a rip away IFAK (Individual First Aid Kit). On the 3 o’clock position (right hand side), I have a G-Code R.T.I. holster which contains my secondary. The reason why I have a battle belt (first source of ammo) is because if for some reason I have to ditch my plate carrier, I still have my basic life support equipment (3x pistol mag, 3x rifle mag, utility pouch, medical pouch, and my secondary).
This is military grade tactical gear!
* Made of heavy duty Nylon instead of cheap China made
polyester fabrics (We will include a piece of fabric so you
can test and see for yourself. If you burn our material it
will burn with white smoke. The cheaper manufacturers
use polyester which burns either black smoke or with
an unpleasant smell.)
* We are using top quality materials, fabrics, and buckles.
* Our factory has been producing military grade gear for
such countries and military groups as Japan, UAE, Taiwan,
Singapore, Sweden and other Special Forces Operatives.
* Made in Taiwan, a U.S.A. ally
* More MOLLE straps on the side of front, back, and s sides of vest for extra capacity loading
* 2 thick shoulder pads with drinking hose holder
* Multi-layered Air flow mesh system to keep your body cool down from the extreme weather condition
* 4 sides of plate holder: Front, back and 2 sides
* 2 small pockets on the 2 sides of cummerbund
* Extra strength emergency pull strap (military grade)
* Recoil buffer pad for high recoil power weapons. (3 ways adjustable: left, right and center)
* Extra large YKK buckles